반응형
Q>
Router의 DHCP를 설정하시오.
- DHCP Pool : cisco
- IP 주소 : 192.168.0.0/24
- GW 192.168.0.0과 브로드캐스트 192.168.255.255는 할당할 주소에서 제외
A>
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip dhcp pool cisco
Router(dhcp-config)#network 192.168.0.0 255.255.255.0
Router(dhcp-config)#exit
Router(config)#ip dhcp excluded-address 192.168.0.0
Router(config)#ip dhcp excluded-address 192.168.255.255
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#sh ip dhcp binding
IP address Client-ID/ Lease expiration Type
Hardware address
Router#sh ip dhcp pool
Pool cisco :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 254
Leased addresses : 0
Excluded addresses : 2
Pending event : none
1 subnet is currently in the pool
Current index IP address range Leased/Excluded/Total
192.168.0.1 192.168.0.1 - 192.168.0.254 0 / 2 / 254
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
반응형
'Network' 카테고리의 다른 글
[네트워크관리사]Router Quiz 21 (0) | 2021.09.03 |
---|---|
[네트워크관리사]Router Quiz 20 (0) | 2021.09.03 |
[네트워크관리사]Router Quiz 18 (0) | 2021.09.03 |
[네트워크관리사]Router Quiz 17 (0) | 2021.09.02 |
[네트워크관리사]Router Quiz 16 (0) | 2021.09.02 |